.. RELEASE.rst
.. _Release_Notes:
Release Notes
=============
.. note:: In Windows use [Alt]-[Cursor left] to return to the previous page
.. toctree::
:maxdepth: 1
Features
========
New in Version 5.0.6
--------------------
This is a point release which fixes a number of issues reported in earlier versions
of 5.0.x. Of particular note, the failure of the program to start when installing on
a new system due to issues finding the config file has been fixed. The speed with
which the program starts up has also been improved. The paracrystalline models, which
have been labelled as "under review" since 2018, have been checked and corrected (bcc
and fcc) and the documentation completely reworked (bcc, fcc, and sc). Elsewhere,
plots now properly support custom data names in the legend, the LM optimizer failing
to run on GPUs or when the starting value of a parameter is outside the min/max range
has been fixed, a problem with the intermittent blanking of plots has also been fixed,
a number of defaults have been changed to be more reasonable, and a number of other
issues in the documentation have been corrected and/or updated.
This version of SasView is built with Sasmodels 1.0.7 and Bumps master.
Pull Request Changes
^^^^^^^^^^^^^^^^^^^^
* Fix error being thrown when the initial guess it outside the min/max range for the LM optimizer @krzywon `[#2422] <https://github.com/SasView/sasview/pull/2422/>`_
* Fix for failure to find custom_config preventing sasview from starting @krzywon `[#2407] <https://github.com/SasView/sasview/pull/2407/>`_
* Cleanup (close) the bumps/DREAM results panel when associate data is removed from sasview @krzywon `[#2365] <https://github.com/SasView/sasview/pull/2365/>`_
* Fix plot legend not updating on custom change @rozyczko `[#2362] <https://github.com/SasView/sasview/pull/2362/>`_
* Add more informative error message to invariant calculator @wpotrzebowski `[#2357] <https://github.com/SasView/sasview/pull/2357/>`_
* Provide more reasonable defaults (number of points in curves, log vs linear scale, residuals don't have error bars) @butlerpd `[#2354] <https://github.com/SasView/sasview/pull/2354/>`_
* Make sesans residual plots show in real space rather than q space @caitwolf `[#2338] <https://github.com/SasView/sasview/pull/2338/>`_
* Fix rare bug that switches slit width and length in the gui @caitwolf `[#2336] <https://github.com/SasView/sasview/pull/2336>`_
* Fix binning bug in implementation of sesans @caitwolf `[#2331] <https://github.com/SasView/sasview/pull/2331/>`_
* Fix problem of a second plot showing up when loading certain data files @pbeaucage `[#2329] <https://github.com/SasView/sasview/pull/2329>`_
* Fix to chaging parameters in FitPage not updating plots. Was most obvious for sesans. @caitwolf `[#2318] <https://github.com/SasView/sasview/pull/2318/>`_
* Fix problem with SlD calculator tool buttons sometimes being squashed hiding the button label @rozyczko `[#2302] <https://github.com/SasView/sasview/pull/2302>`_
* Fix problem with intermittent plot blanking @pbeaucage `[#2300] <https://github.com/SasView/sasview/pull/2300/>`_
* Fix problem with appending graphs when using theory data @rozyczko `[#2298] <https://github.com/SasView/sasview/pull/2298/>`_
* Properly support custom names in plot legend @pbeaucage `[#2293] <https://github.com/SasView/sasview/pull/2293/>`_
* Tweaks to improve startup speed @rozyczko `[#2275] <https://github.com/SasView/sasview/pull/2275/>`_
* Fix problem with losing minimize/restore/close buttons when maximizing fit window @rozyczko `[#2273] <https://github.com/SasView/sasview/pull/2273/>`_
* Add persistent legend visibility toggle @pbeaucage `[#2266] <https://github.com/SasView/sasview/pull/2266/>`_
* Fix label rendering problems due to incorrect escape sequences @llimeht `[#2217] <https://github.com/SasView/sasview/pull/2217/>`_
* Fix update to numpy verion breaking P(R) analysis @lucas-wilkins `[#2178] <https://github.com/SasView/sasview/pull/2178/>`_
* Fix problem with use of Data Operation Tool preventing project saving @rozyczko `[#2099] <https://github.com/SasView/sasview/pull/2099/>`_
* Correct paracrystal model error and rework documentation @butlerpd `[#545] <https://github.com/SasView/sasmodels/pull/545>`_
* Fix rare race condition causing errors @bmaranville `[#537] <https://github.com/SasView/sasmodels/pull/537/>`_
* Fix to allow multiple scattering script to run @wpotrzebowski `[#521] <https://github.com/SasView/sasmodels/pull/521/>`_
* Fix error in core shell Ellipsoid documentation @pkienzle `[#512] <https://github.com/SasView/sasmodels/pull/512/>`_
* Fix models with complex amplitudes not compiling on the fly @pkienzle `[#511] <https://github.com/SasView/sasmodels/pull/511/>`_
* Fix problem with LM optimizer failing when GPUs are turned on by updating to the latest bumps version `[issue #518] <https://github.com/SasView/sasmodels/issues/518/>`_
Documentation Changes
^^^^^^^^^^^^^^^^^^^^^
* Update optimizer help documentation @smk78 `[#2359] <https://github.com/SasView/sasview/pull/2359/>`_
* Update contributor list @wpotrzebowski `[#2114] <https://github.com/SasView/sasview/pull/2114>`_
* Update web links from http to https @smk78 `[#2087] <https://github.com/SasView/sasview/pull/2087/>`_ and `[#2265] <https://github.com/SasView/sasview/pull/2265/>`_
* Update corfunc documentation @lucas-wilkins `[#2047] <https://github.com/SasView/sasview/pull/2047/>`_
* Update gel_fit model documentation and fix formating @smk78 `[#541] <https://github.com/SasView/sasmodels/pull/541/>`_
* Correct and update cylinder model documentation @butlerpd `[#539] <https://github.com/SasView/sasmodels/pull/539>`_
* Restructuring and cross-linking of sasmodels docs @smk78 `[#534] <https://github.com/SasView/sasmodels/pull/534/>`_
* Update marketplace url to https @smk78 `[#522] <https://github.com/SasView/sasmodels/pull/522/>`_
Build System Changes
^^^^^^^^^^^^^^^^^^^^
* Fix Sphinx some of the warnings during build process @smk78 `[#2288] <https://github.com/SasView/sasview/pull/2288/>`_
New Models
^^^^^^^^^^
The following models have been added to the `[Model Marketplace] <https://marketplace.sasview.org/>`_ since v5.0.5 was released:
* Pringle-Schmidt Helices (documentation update)
* Lamellar Slab Partition Constant
Known Issues
^^^^^^^^^^^^
All the known bugs/feature requests can be found in the issues on github.
Note the sasmodels issues are now separate from the sasview issues (i.e. different repositories)
`[sasview] <https://github.com/SasView/sasview/milestones>`_
`[sasmodels] <https://github.com/SasView/sasmodels/milestones>`_
New in Version 5.0.5
--------------------
This is a point release which fixes some issues reported in earlier versions
of 5.0.x. A few highlights are:
* The long standing issue with the Levenberg-Marquardt optimiser not respecting
parameter bounds has been resolved by the move to a later version of
the Bumps package.
* A bug which prevented the radius_effective parameter from being updated
in $P(Q)*S(Q)$ models when the data were resolution smeared has been fixed.
* A bug that prevented the formation of composite mixture models with multiplicity
(for example, models such as core_multi_shell*hardsphere + cylinder or
core_multi_shell\@hardsphere + cylinder) has been fixed.
* The button to reset the selected Q-limits for fitting now works again!
* There has been a technical change to the point in the calculation at which the
volume normalisation of $P(Q)*S(Q)$ models is applied by the move to a later
version of the Sasmodels package. This change was actually incorporated into
v5.0.4 but due to an oversight was omitted from the release notes at the time,
although a note was added to the web version after the release (and has been
subsequently added below). In most instances this change will go un-noticed
unless you happen to be plotting the individual contributions of $P(Q)$ or
$S(Q)$ and comparing them with similar calculations performed in versions of
SasView before v5.0.4, at which point the scaling of the functions will be
seen to be different.
There are also some **new features** in this version. Most notably:
* The Generic Scattering Calculator Tool has been overhauled and its
capabilities significantly expanded. In particular, it will now perform
magnetic/polarised SANS computations. As part of this upgrade, coordinate data
in some VTK formats are now also supported.
* The data loaders have also been improved. SasView will now read CanSAS1D XML
data files with multiple <SASdata> blocks in a single <SASentry>. And, by
popular demand, 1D data can now be saved in CSV format. SESANS data files
with the extension .sesans are now also recognised.
* A Boucher-type interfacial profile function has been added to the spherical_sld model.
This version of SasView is built with Sasmodels 1.0.6 and Bumps 0.9.0.
Pull Request Changes
^^^^^^^^^^^^^^^^^^^^
* Add CSV Writer and Allow freeform file extensions by @krzywon in `[#1793] <https://github.com/SasView/sasview/pull/1793>`_
* Ticket 1804: Remove redundant checks so dx==0 is allowed by @krzywon in `[#1807] <https://github.com/SasView/sasview/pull/1807>`_
* Implement 3d polarisation in SasView by @dehoni in `[1714] <https://github.com/SasView/sasview/pull/1714>`_
* Implement 3d polarisation in Sasmodels by @dehoni in `[#437] <https://github.com/SasView/sasmodels/pull/437>`_
* Limit adding [n] to name on data load and name change by @krzywon in `[#1790] <https://github.com/SasView/sasview/pull/1790>`_
* Various P(r) GUI Fixes by @krzywon in `[#1799] <https://github.com/SasView/sasview/pull/1799>`_
* Image Viewer bug fix by @rozyczko in `[#1871] <https://github.com/SasView/sasview/pull/1871>`_
* Optimizer parameters checked against UI fields #1867 by @rozyczko in `[#1873] <https://github.com/SasView/sasview/pull/1873>`_
* Syntax checker in the model editor. by @rozyczko in `[#1875] <https://github.com/SasView/sasview/pull/1875>`_
* Attempt to address file load widget sluggishness issue. #1866 by @rozyczko in `[#1876] <https://github.com/SasView/sasview/pull/1876>`_
* Data import/export syntax fixes by @krzywon in `[#1877] <https://github.com/SasView/sasview/pull/1877>`_
* Add Compute Button and Limit Fitting Computations by @krzywon in `[#1798] <https://github.com/SasView/sasview/pull/1798>`_
* Minor change to sas_gen.py which should fix #1886 by @rjbourne in `[#1887] <https://github.com/SasView/sasview/pull/1887>`_
* canSAS XML Reader: Load multiple SASdata in a single SASentry by @krzywon in `[#1890] <https://github.com/SasView/sasview/pull/1890>`_
* Ticket 1406: cancel calculation by @rjbourne in `[#1892] <https://github.com/SasView/sasview/pull/1892>`_
* Uncertainties for constrained parameters by @m2cci-NMZ in `[#1682] <https://github.com/SasView/sasview/pull/1682>`_
* Undoing changes from PR #1682 by @Caddy-Jones in `[#1915] <https://github.com/SasView/sasview/pull/1915>`_
* Ticket 1861: Adding the SasView version number by @Caddy-Jones in `[#1893] <https://github.com/SasView/sasview/pull/1893>`_
* Improved add/multiply editor by @rozyczko in `[#1901] <https://github.com/SasView/sasview/pull/1901>`_
* Ticket 1825: scattering calculator enhancements by @rjbourne in `[#1888] <https://github.com/SasView/sasview/pull/1888>`_
* python console fix by @rozyczko in `[#1913] <https://github.com/SasView/sasview/pull/1913>`_
* Ticket 1728: Finishing the Q-Range Sliders by @krzywon in `[#1891] <https://github.com/SasView/sasview/pull/1891>`_
* Using the uncertainties module to propagate errors by @Caddy-Jones in `[#1916] <https://github.com/SasView/sasview/pull/1916>`_
* Distinguish standard model list from full list with plugin models. #1906 by @rozyczko in `[#1907] <https://github.com/SasView/sasview/pull/1907>`_
* Fix Color Map Slider in 2D plots by @dehoni in `[#1929] <https://github.com/SasView/sasview/pull/1929>`_
* Re-create toc entry for sesans_fitting in sasview by @smk78 in `[#1945] <https://github.com/SasView/sasview/pull/1945>`_
* Fixes missing plugin models from structure factor combo box by @caitwolf in `[#1860] <https://github.com/SasView/sasview/pull/1860>`_
* Ticket 1882: Enhance functionality of coordinate systems by @rjbourne in `[#1899] <https://github.com/SasView/sasview/pull/1899>`_
* File loader enhancement of the General Scattering Calculator by @dehoni in `[#1930] <https://github.com/SasView/sasview/pull/1930>`_
* Q-Range slider fix for linear fits by @krzywon in `[#1943] <https://github.com/SasView/sasview/pull/1943>`_
* Fixes to invariant plot high q extrapolation by @phgilbert in `[#1859] <https://github.com/SasView/sasview/pull/1859>`_
* Add .sesans extension to associations.py by @krzywon in `[#1942] <https://github.com/SasView/sasview/pull/1942>`_
* Fix for loader modules not found error by @krzywon in `[#1962] <https://github.com/SasView/sasview/pull/1962>`_
* Remove global variable LOADED_PERSPECTIVES by @krzywon in `[#1984] <https://github.com/SasView/sasview/pull/1984>`_
* Ticket 1814: Allow Q-range reset by @krzywon in `[#1884] <https://github.com/SasView/sasview/pull/1884>`_
* Allow output of scattering calculator to be used as a theory curve by @rjbourne in `[#1912] <https://github.com/SasView/sasview/pull/1912>`_
* Ticket 1820: Enable legacy VTK files in scattering calculator by @rjbourne in `[#1898] <https://github.com/SasView/sasview/pull/1898>`_
* Fix handedness of magnetic structures in mag SLD by @dehoni in `[#1976] <https://github.com/SasView/sasview/pull/1976>`_
* Fixing high CPU consumption on MacOSX by @wpotrzebowski in `[#2005] <https://github.com/SasView/sasview/pull/2005>`_
* Added a simple check so cancelling the dialog doesn't throw an error #1551 by @rozyczko in `[#2014] <https://github.com/SasView/sasview/pull/2014>`_
* Add check for custom structure factors by @rozyczko in `[#2006] <https://github.com/SasView/sasview/pull/2006>`_
* Enable model update on adding new plugin. #1597 by @rozyczko in `[#2013] <https://github.com/SasView/sasview/pull/2013>`_
* Save project: Properly handle scalars by @krzywon in `[#1994] <https://github.com/SasView/sasview/pull/1994>`_
* Change default options on file load widget to not display dir icons by @rozyczko in `[#2015] <https://github.com/SasView/sasview/pull/2015>`_
* radius_effective update for smeared data by @rozyczko in `[#2024] <https://github.com/SasView/sasview/pull/2024>`_
* Don't show RPA in the list of models #2022 by @rozyczko in `[#2025] <https://github.com/SasView/sasview/pull/2025>`_
* Allow composite mixtures with multiplicity #468 by @pkienzle in `[#472] <https://github.com/SasView/sasmodels/pull/472>`_
* FIX: turned magic constants to named magic constants. Refs #468 by @pkienzle in `[#470] <https://github.com/SasView/sasmodels/pull/470>`_
* Spherical boucher model cherry pick by @dehoni in `[#476] <https://github.com/SasView/sasmodels/pull/476>`_
* Pre release fixes by @wpotrzebowski in `[#2028] <https://github.com/SasView/sasview/pull/2028>`_
* Use MPFit fitter as the default fit engine by @krzywon in `[#2037] <https://github.com/SasView/sasview/pull/2037>`_
Documentation Changes
^^^^^^^^^^^^^^^^^^^^^
* Scattering calculator docs by @dehoni in `[#1974] <https://github.com/SasView/sasview/pull/1974>`_
* Doc Update: P Scaling by @smk78 in `[#1956] <https://github.com/SasView/sasview/pull/1956>`_
* Eliminate old tutorial from SasView 5x by @smk78 in `[#1949] <https://github.com/SasView/sasview/pull/1949>`_
* Doc Update: Polydispersity by @smk78 in `[#1938] <https://github.com/SasView/sasview/pull/1938>`_
* Doc Update: Formats by @smk78 in `[#1933] <https://github.com/SasView/sasview/pull/1933>`_
* Doc Update: SESANS in SasView by @smk78 in `[#1931] <https://github.com/SasView/sasview/pull/1931>`_
* Doc building fixes by @llimeht in `[#1744] <https://github.com/SasView/sasview/pull/1744>`_
* Doc Update: P Scaling in Sasmodels by @smk78 in `[#487] <https://github.com/SasView/sasmodels/pull/487>`_
* Doc Update: Polydispersity in sasmodels by smk78 in `[#484] <https://github.com/SasView/sasmodels/pull/484>`_
* Doc Update Formats in Sasmodels by @smk78 in `[#479] <https://github.com/SasView/sasmodels/pull/479>`_
* Doc Update: SESANS in Sasmodels by @smk78 in `[#477] <https://github.com/SasView/sasmodels/pull/477>`_
* DOC: remove sphinx warnings by @pkienzle in `[#462] <https://github.com/SasView/sasmodels/pull/462>`_
* Latex typos in fitting_sq.rst by @pkienzle in `[#456] <https://github.com/SasView/sasmodels/pull/456>`_
* Typo in fitting_sq.rst by @pkienzle in `[#455] <https://github.com/SasView/sasmodels/pull/455>`_
* Miscellaneous typo fixes in models by llimeht in `[#438] <https://github.com/SasView/sasmodels/pull/438>`_
Build System Changes
^^^^^^^^^^^^^^^^^^^^
* Try to run tests everywhere rather than fast-fail by @llimeht in `[#1771] <https://github.com/SasView/sasview/pull/1771>`_
* TST: Lxml dependencies by @wpotrzebowski in `[#1815] <https://github.com/SasView/sasview/pull/1815>`_
* Build installer for windows using GitHub actions by @llimeht in `[#1747] <https://github.com/SasView/sasview/pull/1747>`_
* Release 5.0.4 by @wpotrzebowski in `[#1829] <https://github.com/SasView/sasview/pull/1829>`_
* Adding pip dependency to yml file so that conda doesn't complain by @wpotrzebowski in `[#1853] <https://github.com/SasView/sasview/pull/1853>`_
* Updated file for parity with the yml used in build process by @rozyczko in `[#1854] <https://github.com/SasView/sasview/pull/1854>`_
* Add py3.9 remove py3.6 from github actions by @llimeht in `[#1856] <https://github.com/SasView/sasview/pull/1856>`_
* Update h5py version for all operating systems by @krzywon in `[#1849] <https://github.com/SasView/sasview/pull/1849>`_
* Adding h5py=3.1 as a pip package by @wpotrzebowski in `[#1880] <https://github.com/SasView/sasview/pull/1880>`_
* CI: use pip --cache to find dir by @andyfaff in `[#1926] <https://github.com/SasView/sasview/pull/1926>`_
* Github actions for OSX build by @wpotrzebowski in `[#1927] <https://github.com/SasView/sasview/pull/1927>`_
* Fixing syntax in release.yml by @wpotrzebowski in `[#1946] <https://github.com/SasView/sasview/pull/1946>`_
* Use version parsing package for MPL version check by @krzywon in `[#1947] <https://github.com/SasView/sasview/pull/1947>`_
* Fix for removed _activeQue in newer Matplotlib by @bmaranville in `[#1951] <https://github.com/SasView/sasview/pull/1951>`_
* Gh actions artifacts by @wpotrzebowski in `[#1969] <https://github.com/SasView/sasview/pull/1969>`_
* Update to version 5.0.5b1 by @butlerpd in `[#1970] <https://github.com/SasView/sasview/pull/1970>`_
* Increment the installation directory number to 5.0.5 by @krzywon in `[#1983] <https://github.com/SasView/sasview/pull/1983>`_
* Update of the github workflows by @wpotrzebowski in `[#1985] <https://github.com/SasView/sasview/pull/1985>`_
* GitHub: Freezing MPL to 2.2.5 on windows by @rozyczko in `[#1989] <https://github.com/SasView/sasview/pull/1989>`_
* Switching to PyQT 5.13 by @wpotrzebowski in `[#2021] <https://github.com/SasView/sasview/pull/2021>`_
The full sasview and sasmodels changelogs, respectively, are available at:
* https://github.com/SasView/sasview/compare/v5.0.4...v5.0.5
* https://github.com/SasView/sasmodels/compare/v1.0.5...v1.0.6
New Models
^^^^^^^^^^
The following models have been added to the `[Model Marketplace] <https://marketplace.sasview.org/>`_ since v5.0.4 was released:
* Magnetic Whirl
* Maier-Saupe distribution
* Cyclic Gaussian distribution
* Superball Model - Neither Sphere nor Cube
* OrientedMagneticChains
Known Issues
^^^^^^^^^^^^
The ‘rpa’ (Random Phase Approximation, for polymer scattering) model has been
temporarily withdrawn. Some gremlins had crept into how the model parameters
interacted with the Fit Page which meant you were not performing the calculation
you thought you were. This is being investigated. Should you need it, a separate
binary blend model (the most performed calculation) is available from the
`[Model Marketplace] <https://marketplace.sasview.org/>`_ .
All the known bugs/feature requests can be found in the issues on github.
Note the sasmodels issues are now separate from the sasview issues (i.e. different repositories)
`[sasview] <https://github.com/SasView/sasview/milestones>`_
`[sasmodels] <https://github.com/SasView/sasmodels/milestones>`_
New in Version 5.0.4
--------------------
This is a point release which fixes some issues reported in earlier versions
of 5.0.x:
* A bug that had been around since 4.2.2 and which prevented Batch Fitting from
using any dI values in the data file has finally been fixed. The consequence of
this bug was that Single Fits and Batch Fits on the same datasets could return
different parameters. Now, where present, dI values will always be used by default
in both cases.
* The bug introduced in 5.0.3 which prevented the plotting of Batch Fit results has also
been fixed.
* An issue with the behaviour of the 1D pinhole resolution smearing routine in cases of
large divergence has been addressed.
* A number of improvements have been made to plotting and plot management.
* Several usability issues in the P(r) Inversion and Invariant Analysis perspectives
have been addressed.
* Improvements have also been made to the functioning of Project Save/Load.
There are also some new features in this version:
* Though not strictly a new feature, the functionality and operation of parameter
constraints has been significantly overhauled for this version.
* The slicer functionality has been significantly overhauled and made to work properly.
* The slider bars on plots for selecting the q-range for fitting that featured in earlier
versions of SasView have been re-introduced by popular request, although they do not
yet work on linearized plots.
* It is now possible to swap the dataset used to create an existing FitPage for a different
dataset. This removes the need to re-generate a complex model (eg, featuring many parameters
and/or constraints) many times over to use it to fit several datasets.
* It is now also possible to assign custom names to loaded datasets, rather than just
identifying the data by its filename. Right-click on a dataset in the Data Explorer
to activate.
There has also been a technical change in this version to how the volume
normalisation is incorporated in the interaction calculator that computes $I(Q)$
from $P(Q) S(Q)$. The change was made in Sasmodels 1.0.5 with which this version
is built and will affect all future versions of SasView. Prior to the change
the scaling of the $P(Q)$ function that might appear in the *Data Explorer* was
incorrect. This was easily seen if $P(Q)$ and $I(Q)$ were plotted together but
had apparently escaped notice for some time. But this does, of course, mean that
comparisons of the $P(Q)$ contributions to models between this version of SasView
and previous versions will differ. Further details of the change can be found
`here <https://github.com/SasView/sasview/issues/1698>`_.
New features/improvements
^^^^^^^^^^^^^^^^^^^^^^^^^
* sasview #1725: Horizontal line at y=0 needed in P(r) plots
* sasview #1702: Allow for a choice of how data is named in the Data Explorer
* sasview #1699: Allow check/uncheck of sub-selected data in Data Explorer
* sasview #1676: Checkbox of highlighted row is checked also when clicking another checkbox
* sasview #1303: CanSAS XML Reader refactor
* sasmodels #443: Update to polydispersity.rst
* sasmodels #429: Create model for superparamagnetic relaxing particles
* sasmodels #390: Re-describe Source intensity in model parameter tables
* sasmodels #253: use new orientation for magnetic models (Trac #910)
Bug fixes
^^^^^^^^^
* Fixes sasview #1796: Batch Fitting does not respect Q-range for fitting
* Fixes sasview #1795: Display of batch fitting results is broken in 5.0.4
* Fixes sasview #1794: Batch fitting in 5.x returns different parameters to single fits in 5.x
* Fixes sasview #1782: RgQmax and RgQmin are inverted in the Gunier linear fit
* Fixes sasview #1776: Slicers Using Masked Data Points in Calculation
* Fixes sasview #1754: Delete Data does not remove data or plots from Fitting, P(r) or Inversion
* Fixes sasview #1738: Conflicting definition of displayData()
* Fixes sasview #1711: sasview 5, Q resolution smearing issues with broad_peak model
* Fixes sasview #1710: sasview fails to open .h5 files using h5py 3.1
* Fixes sasview #1701: Issue with slashes in data titles in CanSAS1D (and probably NXcanSAS)
* Fixes sasview #1698: Provide P(Q) separately when fitting
* Fixes sasview #1696: Failure in getSymbolDict on selecting parameters for constraints
* Fixes sasview #1681: Generic Scattering Calculator produces empty 2D map on sld file
* Fixes sasview #1674: Reloading a project in the same session duplicates the model/residuals in the Data Explorer
* Fixes sasview #1671: pdh data loader bug in 4.x and ESS_GUI 5.x
* Fixes sasview #1657: Loading project without fit_params entry causes empty fit window (v5.0.3)
* Fixes sasview #1655: Corfunc and Invariant Perspectives not able to remove/swap data (5.x)
* Fixes sasview #1654: 5.0.4 disable rather than remove constraints if do a fit on a single FitPage
* Fixes sasview #1653: 5.0.4 new constraints checks over zealous on load project
* Fixes sasview #1649: 4.x/5.x: Slicer Parameters control only appears in context menu once you have sliced
* Fixes sasview #1648: 5.0.3 not updating radius_effective in GUI
* Fixes sasview #1647: 4.x/5.x: Sector slicer tool Q plot could do with better resolution
* Fixes sasview #1646: 4.x/5.x: Annulus slicer tool phi plot could do with better resolution
* Fixes sasview #1640: Linux: SasView >5.0.1 binary cannot copy default custom_config.py
* Fixes sasview #1616: ESS_GUI: Model label on plot keeps being reset
* Fixes sasview #1611: Inconsistent behaviour of extrapolation Fit/Fix radio buttons in Invariant Perspective
* Fixes sasview #1610: Chart in Invariant Perspective Status Dialog not displaying the low-Q contribution to Q*
* Fixes sasview #1609: Changing Q-range limits in Invariant Perspective has no effect on extrapolations
* Fixes sasview #1608: No Q-limit bars in Invariant Perspective
* Fixes sasview #1607: Once extrapolation is turned on in the invariant it cannot be turned off
* Fixes sasview #1606: Invariant does not report the total invariant
* Fixes sasview #1605: Problem loading canSAS data into Invariant
* Fixes sasview #1604: The Invariant low Q extrapolation choice is not honored
* Fixes sasview #1600: v5 constrained value within single FitPage not being returned to gui
* Fixes sasview #1589: 5.0 turn off or remove constraint ?
* Fixes sasview #1583: calc.py throws erros after building SasView
* Fixes sasview #1574: Invariant perspective fixes need to be ported to 5.x
* Fixes sasview #1566: Default Checkboxes in data manager need changing
* Fixes sasview #1557: GUI losing track of fitpage and plot associations
* Fixes sasview #1547: Resolution is incorrectly handled in 5.x
* Fixes sasview #1544: Need to examine 2D data pixel sizes
* Fixes sasview #1542: Crosstalk between Corfunc and Invariant perspectives
* Fixes sasview #1541: Invariant and the infinite multiplication of plots
* Fixes sasview #1539: Corfunc requires two shots to populate the data name box
* Fixes sasview #1537: Allow for replacing data in a Fit Page
* Fixes sasview #1535: ESS_GUI: Existing common parameters not preserved between models in 5.x
* Fixes sasview #1534: ESS_GUI: Something strange with 5.x and the .sasview folder
* Fixes sasview #1532: Add a constraint checking mechanism
* Fixes sasview #1526: Project Save/Load functionality of 4.x needs to be restored
* Fixes sasview #1478: v5 & v4 TEst that P(Q)S(Q) plugin works
* Fixes sasview #1472: Sort out the Invariant Perspective & Documentation (#1434 & #1461)
* Fixes sasview #1469: 2D tools
* Fixes sasview #1453: 5.1 gui initialisation issue for Onion model
* Fixes sasview #1446: 5.0 dI uncertainty unavailable in batch mode
* Fixes sasview #1408: Magnetic model documentation is inconsistent with code
* Fixes sasview #1381: Slicer in 5.0 doesn't contain the batch, fitting, log/linear etc features
* Fixes sasview #1340: 5.0 invariant mac not plotting
* Fixes sasview #1243: Display title rather than filename in data browser (Trac #1213)
* Fixes sasview #1137: Verify and document up_frac_i and up_frac_f calculations for magnetic models (Trac #1086)
* Fixes sasview #863: Make it easier to use the same fit set-up with different data sets (Trac #747)
* Fixes sasmodels #367: Correlation length model documentation is wrong
* Fixes sasmodels #210: Show all failing tests rather than stopping at the first
New Models
^^^^^^^^^^
The following models have been added to the `[Model Marketplace] <https://marketplace.sasview.org/>`_ since v5.0.0 was released:
* Magnetic vortex in a disc
* Field-dependent magnetic SANS of misaligned magnetic moments in bulk ferromagnets
* SANS of bulk ferromagnets
* Core_shell_ellipsoid_tied and core_shell_ellipsoid_repar
* Lamellar_Slab_APL_nW
* 5 Layer Core Shell Disc
* Superparamagnetic Core-Shell Spheres with 3D field orientation
* Superparamagnetic Core-Shell Spheres
* Octahedron
* Magnetically oriented, rotating and precessing anisometric particle (MORP)
* Cumulants
* Cumulants DLS
* Peak Voigt
* Long Cylinder
* Sphere Concentration A
* Binary Blend
* Exponential
* 2 Layer General Guinier Porod
* Core double shell sphere filled with many cylinders in the core
* Fractal S(q)
* Mass Fractal S(q)
* Core shell cuboid
* Core shell sphere filled with a cylinder in the core
* Correlated_spheres
Known Issues
^^^^^^^^^^^^
It has come to our attention that some Mac users get a dialogue box
saying *“SasView5.app”* is damaged and can’t be opened. You should move
it to the Trash when they try and install 5.0.4. This seems to affect
machines running MacOS earlier than 10.15. However, we have found that
it is possible to install SasView on 10.13, for example, by clearing
the extended attributes on the package by executing the command:
xattr -cr /Applications/SasView5.app
At this time, the reinstated slider bars on plots for selecting the
q-range for fitting do not work on linearized plots.
The button for resetting the Q-range for fitting to the data limits
(FitPage > Fit Options > Fitting Range) is also not working.
All the known bugs/feature requests can be found in the issues on github.
Note the sasmodels issues are now separate from the sasview issues (i.e. different repositories)
`[sasview] <https://github.com/SasView/sasview/milestones>`_
`[sasmodels] <https://github.com/SasView/sasmodels/milestones>`_
New in Version 5.0.3
--------------------
This is a point release which fixes several issues, but in particular:
* a serious bug in the resolution smearing interface which was applying
a single value of $dq/q$ to all data points even if $dq/q$ was provided in
the data file;
* a very long-standing bug in the Invariant Analysis interface which was
computing specific surface ($Sv$) values that were *twice* what they should
have been (The opportunity has also been taken to completely overhaul the
documentation for the Invariant Analysis at the same time);
* inconsistent and incorrect behaviour of the 'is fittable' checkbox
for polydispersities which could lead to unrealistic PD values being
returned during fitting.
New features/improvements
^^^^^^^^^^^^^^^^^^^^^^^^^
* sasview # 1622: RC1 problems with installation/running on Windows
* sasview # 1565: (ESS_GUI) Report dialog enhancements
* sasview # 1564: Enhancements to Report Results
* sasview # 1552: Enable mpl toolbar
There are also several usability improvements, including better handling of
constraints between datasets for simultaneous fits, and control over plots.
With this release Windows users are no longer guided to install SasView
to C:\Program Files. This had started to become an issue as some IT providers
tightened their security settings, particularly under Windows 10, either
causing installation to fail (unless the user could elevate permissions), or
prevent SasView starting ('failed to execute script sasview'). The installation
process now prompts for the type of installation required, and defaults to
C:\SasView-x.x.x
Bug fixes
^^^^^^^^^
* Fixes sasview # 1632: ESS_GUI Documentation: How to test a plugin model needs updating
* Fixes sasview # 1623: 5.0.3 RC1 crashing during fitting
* Fixes sasview # 1606: Invariant does not report the total invariant
* Fixes sasview # 1599: ESS_GUI: fix data test
* Fixes sasview # 1598: ESS_GUI: allow data replacement on a fit page
* Fixes sasview # 1579: Save inversion state in project and analysis files (ESS_GUI)
* Fixes sasview # 1578: Changing perspective closes the perspective
* Fixes sasview # 1567: Ess gui 1554 slicer
* Fixes sasview # 1560: set the sasmodels dll cache directory in sasview startup
* Fixes sasview # 1556: Fixed the edge cases and added a beefy unit test. #1546
* Fixes sasview # 1554: ESS_GUI: annulus slicer not opening
* Fixes sasview # 1553: Ess gui 1547 smearing
* Fixes sasview # 1550: Ess gui 1522 poly check
* Fixes sasview # 1548: Sasview 5.0.2 "file converter" tool does not open
* Fixes sasview # 1547: Resolution is incorrectly handled in 5.x
* Fixes sasview # 1546: Plotting an already plotted dataset causes the new plot to only show model
* Fixes sasview # 1543: SasView application window needs to be scrollable
* Fixes sasview # 1538: Constrained fitting doesn't work when setting min/max for polydispersity
* Fixes sasview # 1536: ESS GUI: Paste Params not activated until Copy Params has been used
* Fixes sasview # 1535: ESS_GUI: Existing common parameters not preserved between models in 5.x
* Fixes sasview # 1534: ESS_GUI: Something strange with 5.x and the .sasview folder
* Fixes sasview # 1529: ESS GUI Corfunc: Input area is not scrollable in Corfunc Perspective in 5.0.2
* Fixes sasview # 1527: NXcanSAS definition changes
* Fixes sasview # 1523: Plot legend visibility toggle needs to be restored
* Fixes sasview # 1522: Incorrect behavior of "fittable" checkbox in polydispersity tab
* Fixes sasview # 1490: Problem using constraints in 5.x
* Fixes sasview # 1456: 5.0.1 constraints between FitPages stop working
* Fixes sasview # 1414: No pan function in plot windows in 5.0.1
* Fixes sasview # 1002: canSAS XML should save transmission spectrum
* Fixes sasview # 726: Check default value of cansas_version property in CansasReader class
* Fixes sasmodels # 415: Suppress pyopencl caching bug for Intel on Mac
* Fixes sasmodels # 414: sasview saying unknown distribution option 'test_requires'
* Fixes sasmodels # 404: delay the inevitable a little longer and reenable python 2.7 support
* Fixes sasmodels # 402: sasview 1534: use source hash as part of dll name to avoid collisions
* Fixes sasmodels # 401: warn if ER() is ignored
* Fixes sasmodels # 365: OpenCL errors on macbook pro 2017
Known Issues
^^^^^^^^^^^^
At this time, and unlike version 4.x, only fitting and P(r) inversion sessions can be saved as project files.
There is also a bug which is stopping Batch Fitting from using the intensity uncertainty (dI) data if this
is present in the files being processed. As the default behaviour of normal Single Fitting is to automatically
use the dI data in the file if it is present, this means that the results of Single Fitting and Batch Fitting
the same data will differ.
All the known bugs/feature requests can be found in the issues on github.
Note the sasmodels issues are now separate from the sasview issues (i.e. different repositories)
`[sasview] <https://github.com/SasView/sasview/milestones>`_
`[sasmodels] <https://github.com/SasView/sasmodels/milestones>`_
New in Version 5.0.2
--------------------
This is a point release which fixes several issues reported in version 5.0.1, however
there are also some new features:
New features/improvements
^^^^^^^^^^^^^^^^^^^^^^^^^
* sasview # 1480: Added enumeration of plots in the Windows menu, with raising/setting
* sasview # 1355: SasView 5.0 lacks file conversion option in tool menu
* sasmodels # 390: Re-describe Source intensity in model parameter tables
* sasmodels # 382: Doc gen speedup, improved random model generation and minor fixes
* sasmodels # 211: Reparameterize existing model.
Bug Fixes
^^^^^^^^^
* Fixes sasview # 1501: Update 5.x documentation for Corfunc
* Fixes sasview # 1499: Ess gui 1355 file converter
* Fixes sasview # 1484: SasView 5 (Ubuntu) - Need to change colors in Data operation combobox
* Fixes sasview # 1482: 4.x: Check packages comparison to YAML files
* Fixes sasview # 1481: Fix for Fit Panel based Plot command for single-data/multiple fit tab
* Fixes sasview # 1479: linspace errors
* Fixes sasview # 1476: Quick Plot in Data Explorer not working for 1D data
* Fixes sasview # 1463: Dmax explorer : pressing enter closes window
* Fixes sasview # 1460: resolution setting not persistent in theory mode of 5.0.1
* Fixes sasview # 1459: dy = 1 for every point of Freeze theory curves (and saved as data file) in 5.0.
* Fixes sasview # 1455: 5.0.1 load project generates a second FitPage1
* Fixes sasview # 1454: 5.0.1 sending same data to more than one fit page - plotting issues
* Fixes sasview # 1444: ESS GUI: Warn user when data set fully masked
* Fixes sasview # 1431: When loading plugin model with a spurious unicode character plugin editor crashes
* Fixes sasview # 1419: Could we improve stepping through graph windows in 5.x
* Fixes sasview # 1138: Check package versions in yaml files and setup.py
* Fixes sasview # 697: Update check_packages to flag required package versions
* Fixes sasmodels # 383: Model docs build failing on linspace error
* Fixes sasmodels # 381: reparameterize has a bug (at least in v5)
Known Issues
^^^^^^^^^^^^
A very long-standing error has been identified in the Invariant Analysis
perspective. The value of the specific surface $Sv$ that is being returned
is in fact *twice* the value that it should be. Work is underway to correct this
and some other deficiencies in the operation of the perspective, and to significantly
enhance the invariant documentation.
Also, at this time, and unlike version 4.x, only fitting sessions can be saved as project files.
New in Version 5.0.1
--------------------
This is a point release which fixes several issues reported in version 5.0.0.
Bug Fixes
^^^^^^^^^
* Fixes sasview # 1452: Clarified issue with Add/Multiply operation for plugin models
* Fixes sasview # 1441: Show SLD profile plot - linear not log
* Fixes sasview # 1431: When loading plugin model with unicode character, plugin editor crashes
* Fixes sasview # 1417: Ambiguous labeling in Resolution tab
* Fixes sasview # 1413: Corfunc is not working well
* Fixes sasview # 1412: Windows installer shortcut is misnamed
* Fixes sasview # 1410: Issues with multi-core shell model
* Fixes sasview # 1374: Data Operations not including all datasets
* Fixes sasview # 1371: Multiple issues with fit plot lifetimes
* Fixes sasview # 1361: Data with negative values not showing on linear scale
* Fixes sasview # 1357: Q-range in the Correlation Function can be set by dragging
* Fixes sasview # 1356: Load in Mask Data column from NCNR 2D Data
* Fixes sasview # 1356: Change default state of dependent plots to unchecked
* Fixes sasview # 1350: Multiple issues with the 2D slicer
* Fixes sasview # 1339: Problem with plotting of the Correlation Function
* Fixes sasview # 1337: Automatically resizing plot legends
* Fixes sasview # 1337: Non-resizing plot legend on OSX
* Fixes sasview # 1336: Issues with closing and reopening fit plots
* Fixes sasview # 1327: Append functionality too generous
* Fixes sasview # 1325: Changing model resets the Q-range
* Fixes sasview # 1293: Cannot model SESANS Data in GUI
* Fixes sasview # 1086: Added separate thread for OpenCL tests
* Fixes sasview # 937: Set theory and data to the same Vmin/Vmax for 2D plots
* Fixes sasview # 690: Set reasonable min/max on polydispersity values for fitting
Known Issues
^^^^^^^^^^^^
A problem has been identified in Version 4.2.2 which also affects versions
5.0.0 and 5.0.1. The Easy Add/Multiply Editor dialog should not be used to
combine a plugin model with a built-in model, or to combine two plugin models.
In 5.0.0 the operation will fail (generating an error message in the Log Explorer).
Whilst in 5.0.1 the operation has been blocked until the problem can be fixed.
If it is necessary to generate a plugin model from more than two built-in models,
please edit the plugin model .py file directly and specify the combination of built-in
models directly. For example::
from sasmodels.core import load_model_info
from sasmodels.sasview_model import make_model_from_info
model_info = load_model_info('power_law + fractal + gaussian_peak + gaussian_peak')
model_info.name = 'MyBigPluginModel'
model_info.description = 'For fitting pores in crystalline framework'
Model = make_model_from_info(model_info)
New in Version 5.0
------------------
This is a new version of SasView featuring new and enhanced GUI, back-end calculations,
GUI separation, optimization of calculations and other improvements. This release also
includes beta (decoupling) approximation for intensity calculation.
The release is based on Python 3 and Qt5/PyQt5.
We recommend that you avoid using installation folder paths which contain spaces, non-Latin
characters or characters not available on a standard keyboard.
Changes/Improvements from 5.0.beta2
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
* Beta (decoupling) approximation has been introduced
* Stop fit button added to Constrained and Simultaneous Fitting
* Plotting has been improved
* Volume fraction naming conflicts has been resolved
* SLD calculator user interface has been improved
* Fit Options tab has been improved
* Windows installer path specification has been resolved
* Copy parameters function has been fixed
* Save/Load Project functionality has been improved
Documentation
^^^^^^^^^^^^^
* Documentation for Constrained and Simultaneous Fitting has been considerably reworked.
* Tutorials have been adapted to match 5.0 interface
Known Issues
^^^^^^^^^^^^
All the known bugs/feature requests can be found in the issues on github.
`[sasview] <https://github.com/SasView/sasview/milestones>`_
`[sasmodels] <https://github.com/SasView/sasmodels/milestones>`_
New in Version 4.2.0
--------------------
This release heralds many improvements and a host of bug fixes, along with
some significant changes from previous versions. Further, as promised, it
marks the end of support for 32 bit operating systems and is only
available for 64 bit operating systems.
With this version the change to the new model API and plugins infrastructure
begun with 4.0 is essentially complete (though extensions are in the works,
and more are likely, they should remain backwardly compatible with previous
versions of SasView).
.. warning:: Old-style plugin models, including old sum|multiply models, continue
to be supported (i.e. SasView will run them) in 4.x, although our
automatic on-the-fly translation may not cope in all use cases (see
Known Issues below). However, this backward compatibility will be
removed in 5.0 and users are therefore strongly encouraged to
convert their custom models to the new API.
Finally, the changes to orientation angles and orientational distribution
definitions are now also complete.
Changes
^^^^^^^
* The infrastucture for calculating 2D patterns from 3D orientated objects
has been totally re-factored. It is now more accurate and consistent
across models.
* The way that SasView defines the orientation of anisometric and
aligned objects has been completely overhauled. It now differs from
previous versions.
* Plugin models, including sum|multiply models, have completely migrated
to the new infrastructure. NOTE that 3.x type models as well as early,
intermediate 4.x type models, including those generated by sum|multiply
will continue to be supported in 4.x but will likely no longer be
supported after the move to 5.0. Users are strongly encouraged to
migrate any custom models.
* The NeXus loader has been removed as it is superseded by the NXcanSAS
standard loader and SasView does not support the treatment of raw
data.
Improvements
^^^^^^^^^^^^
* The accuracy/speed of some numerical integrations have been improved.
* An orientation viewer tool has been introduced to assist in
understanding the new orientation framework.
* Problems with the computation of magnetic scattering from some
objects have been rectified. Some questions remain however.
* The known issue with the core_shell_parallelepiped model is now fixed.
* An error in the be_polyelectrolyte model was identified and rectified, but
the fix is yet to be validated.
* (Added post-release) An error with the reporting of the scale parameter
from the spinodal model was rectified.
* A number of issues and inconsistencies with the creation of
sum|multiply models have been rectified.
* A Boltzmann distribution has been added for polydispersity/orientational
distributions.
* Some batch slicing options have been introduced.
* Correlation function analysis now computes both the 1D and 3D functions.
* There are several data loading improvements.
* There are several improvements to Save/Load Project.
* The SasView version number now appears in Reports.
* The Release Notes are now available from the program Help menu.
* There have been numerous other bug fixes.
Documentation
^^^^^^^^^^^^^
Several sections of the help documentation have undergone significant
checking and updating, particularly those relating to orientation,
magnetic scattering, and polydispersity distributions.
Detailed advanced instructions for plugin writing and some scripting
instructions have also been added.
Concerns about the intended versus implemented meaning of some parameters
in the bcc_paracrystal, fcc_paracrystal, and sc_paracrystal models have
been brought to our attention. These have yet to be resolved and so a
Warning has been placed on each of these models. Anyone who feels they
may have the requisite expertise to investigate these concerns is strongly
encouraged to contact the Developers!
Other Work
^^^^^^^^^^
* A Third-Party initiative has recently succeeded in getting SasView to
run on Debian. More details at
https://github.com/SasView/sasview/wiki/DevNotes_Projects_Debian
* With this release we have started to prepare for the inevitable move
to Python 3, which will occur with the release of 5.0
* SasView 5.0 is currently in development. The two most significant
features of this version will be (i) a move away from the present
WxPython GUIs to new, completely rewritten, Qt5 GUIs, and
(ii)implementation of the Beta-approximation for S(Q). Subject to
resources, some limited access to the latter functionality may be
available in a future SasView 4.x release.
Bug Fixes
^^^^^^^^^
* Fixes # 14: Loading a saved project is really really slow
* Fixes # 260: Box integration does not update when entering values in dialog
* Fixes # 446: Saving plot as PGF (not PDF!) format throws error
* Fixes # 467: Extend batch functionality to slicer
* Fixes # 489: ABS reader (NIST 1D) does not handle negative dx properly (USANS slit smearing)
* Fixes # 499: create sin(x)/x, 2*J1(x)/x and 3*j1(x)/x functions
* Fixes # 510: Build PDF documentation along with HTML
* Fixes # 525: Add GUI category defaults to models in sasmodels
* Fixes # 579: clean up sasview directory
* Fixes # 597: Need to document Combine Batch Fit
* Fixes # 645: GUI logic problem in Batch vs single fit mode
* Fixes # 648: Need to allow user input background value in Pr perspective
* Fixes # 685: Fix data upload to marketplace
* Fixes # 695: linear slope in onion model
* Fixes # 735: Review new Corfunc documentation
* Fixes # 741: Recalculate P(Q) and S(Q) components on model update.
* Fixes # 767: Sum/Product Models don't do what they should
* Fixes # 776: angular dispersity
* Fixes # 784: Add 3D integral to Correlation Function analysis
* Fixes # 786: core_shell_parallelepiped 1-D model is incorrect
* Fixes # 818: 'report button' followed by 'save' makes an empty pdf file???
* Fixes # 830: Check compliance of loader against NXcanSAS-1.0 release
* Fixes # 838: Fix model download from marketplace
* Fixes # 848: can't save analysis when only one fit page
* Fixes # 849: Load Folder should ignore files starting with .
* Fixes # 852: More unit tests, especially for oriented or 2d models
* Fixes # 854: remove unnecessary sleep() in fitting perspective
* Fixes # 856: Reading SAS_OPENCL from custom_config sometimes raises an ERROR
* Fixes # 861: cannot defined a structure factor plugin
* Fixes # 864: New Model Editor (simple plugin editor) error parsing parameter line
* Fixes # 865: Plugin live discovery issues
* Fixes # 866: inform user when NaN is returned from compute
* Fixes # 869: fit page computation thread cleanup
* Fixes # 875: Possible weirdness with 1D NXcanSAS data
* Fixes # 876: Add check for HDF5 format in dataloader
* Fixes # 887: reorganize tree, separating the installed source from the build source
* Fixes # 889: Refactor dataloader error handling infrastructure
* Fixes # 890: use new orientation definition for asymmetric shapes
* Fixes # 891: update docs for oriented shapes with new orientation definition
* Fixes # 896: equations in core shell parallelepiped docs do not match code
* Fixes # 898: Image Viewer Tool file selector issue
* Fixes # 899: Igor Reader q calculation
* Fixes # 902: IgorReader Q calculation needs fixing/improving
* Fixes # 903: sasview - all non-gui tests should be converted to run in Python 3
* Fixes # 906: polydispersity not showing up in tabulated results
* Fixes # 912: About box points to misleading contributors page on Github
* Fixes # 913: Need to add Diamond developer and logo in relevant places
* Fixes # 915: load project issues
* Fixes # 916: Proper Logging
* Fixes # 920: Logarithmic binning option in the slice viewer
* Fixes # 921: Improve developer communication methods
* Fixes # 922: Remove support for all data formats that are not in q space
* Fixes # 923: Add CI and trac integrations to Slack
* Fixes # 930: fitting help says chisq is normalized to number of points
* Fixes # 931: Allow admins to edit all models and upload data etc on marketplace
* Fixes # 932: Need to fix upload of data files to marketplace
* Fixes # 934: Slurp tutorial repo for tutorials
* Fixes # 935: Build new tutorials as PDF
* Fixes # 943: Deep copy error on setting model after data is selected
* Fixes # 950: Most of the readers don't close files properly.
* Fixes # 954: cross check dll/opencl/python polydispersity and orientation results
* Fixes # 956: Possible problem with new doc build process
* Fixes # 961: sasmodels tests should fail if the parameter name does not exist
* Fixes # 962: star polymer typo in docs
* Fixes # 966: Inconsistent chi2 reporting
* Fixes # 967: no uncertainties errors on fitting parameters
* Fixes # 969: About Box not picking up dls_logo.png
* Fixes # 970: ASCII loader doesn't handle ISIS 2D ASCII
* Fixes # 974: blacklist Intel HD 620/630 for double precision
* Fixes # 978: load project fails for pages which have not been defined
* Fixes # 983: Remove Nexus Loader
* Fixes # 984: PDF reports are not being properly generated on Windows
* Fixes # 985: Saving Project Fails
* Fixes # 986: Send to fitting overwrites theory page even if blank FitPage has focus
* Fixes # 990: utest_sasview.py giving different results than run_one.py
* Fixes # 993: Windows x64 versions not installing to correct folder
* Fixes # 994: Error changing fit engine
* Fixes # 995: OpenCL required on Linux even if turned off in GUI
* Fixes #1006: multiplicity models don't work with SQ
* Fixes #1007: spherical_sld model freezes SasView
* Fixes #1008: plugin model scaling not working?
* Fixes #1010: Win64 build script not creating working executable
* Fixes #1011: sld_test failing on ubuntu
* Fixes #1013: FileReaderBaseClass output[] not reset - same file loaded multiple times
* Fixes #1018: add Boltzmann distribution
* Fixes #1021: add PDF documentation to website and document in wiki release process
* Fixes #1024: Update version numbers in master
* Fixes #1025: Sum/multiply editor hangs
* Fixes #1030: volume normalization for hollow shapes is different from solvent-filled shapes
* Fixes #1032: convert C++ modules to C
* Fixes #1035: Order of combining P(Q) and S(Q) in Plugins seems to matter
* Fixes #1037: data loader crop not working? & all fits crashing
* Fixes #1043: problem compiling marketplace models
* Fixes #1044: Unable to upload c file to marketplace
* Fixes #1046: convert non builtin models in the marketplace to new API
* Fixes #1050: fix appveyor test for sasmodels win 64 python 3
* Fixes #1052: Can't use a user-created plugin model in a plugin model
* Fixes #1054: Check plugin & orientation descriptions in full docs once SasModels PR #57 is merged
* Fixes #1057: phi rotation issue for elliptical cylinder
* Fixes #1060: incorrect default for rectangle dispersion
* Fixes #1062: win32 build not installing correctly
* Fixes #1064: "Fitting did not converge!!!" error with a Sum|Multi plugin model
* Fixes #1068: 2d data (from NG7) not loadiing - strange format?
* Fixes #1069: GUI problem when using polydispersity/orientation distributions
* Fixes #1070: Parameter error boxes should not be editable
* Fixes #1072: Orientation distributions seem to depend on initial angle
* Fixes #1079: Remove save button in report dialog on Mac
* Fixes #1081: GUI problem with new orientation distribution
* Fixes #1083: Magnetic models not being computed
* Fixes #1099: Erratic behaviour of Sum|Multi model in 4.1.2
* Fixes #1101: Batch results page not displaying polydispersity values
* Fixes #1128: AutoPlot generation for model documentation does not include background
* Fixes #1131: OpencCl dialog does not open
* Fixes #1132: Slit Size Calculator Tool not working
* Fixes #1139: Missing Docs and Help for new Batch Slicing
* Fixes #1141: Intro to scripting.rst needs improvement
* Fixes #1142: Plugin framework is broken
* Fixes #1145: Update models in model marketplace to 4.2 when 4.2 is released.
* Fixes #1155: BE Polyelectrolyte errors
* Fixes #1160: fix VR for core_shell_cylinder, fractal_core_shell and hollow_cylinder
* Fixes #1163: Fix help note in sum of sum|multiply interface
* Fixes #1164: Sphinx doc build does not support superscript or substitution
* Fixes #1166: No longer able to report from multiple fit pages
* Fixes #1167: Clarify the documentation for the Spinodal Model
* Fixes #1173: more problems with math in plugins
* Fixes #1176: Make Release Notes/Known Issues available from Help in Menu Bar
* Fixes #1179: PDF Report should contain SasView Version Number
* Fixes #1183: Test from creating new model reset all parameters to default in all open FitPages
* Fixes #1188: fitpage hangs if change model while magnetism is on
* Fixes #1191: Correct erroneous Scale reported by Spinodal model
**It is recommended that all users upgrade to this version, but your
attention is drawn to the Changes section above.**
New in Version 4.2.0-Beta
-------------------------
This is a beta pre-release version of 4.2.0. A number of fixes and changes
have been made in the year since the previous release. Full release notes
will be compiled prior to the full release 4.2.0.
Highlights are:
* Infrastucture for calculating 2D patterns from 3D orientated objects
has now been totally refactored
* Plugins have completely migrated to the new infrastructure now,
including sum/multiply models
* Some batch slicing options have been introduced
* The known issue with the core_shell_parallelepiped is now fixed
* Several data loading improvements
* Several save Project improvements (though there are more to come)
* Numerous bug fixes
* Lots of documentation enhancement
In the meantime please report any bugs or issues found while using this beta
New in Version 4.1.2
--------------------
This point release is a bug-fix release addressing:
* Fixes #984: PDF Reports Generate Empty PDFs
* Fixes a path typo
* 64 bit and 32 bit Windows executables now available
It is recommended that all users upgrade to this version
New in Version 4.1.1
--------------------
This point release is a bug-fix release addressing:
* Fixes #948: Mathjax CDN is going away
* Fixes #938: Cannot read canSAS1D file output by SasView
* Fixes #960: Save project throws error if empty fit page
* Fixes #929: Problem deleting data in first fit page
* Fixes #918: Test folders not bundled with release
* Fixes an issue with the live discovery of plugin models
* Fixes an issue with the NXcanSAS data loader
* Updated tutorials for SasView 4.x.y
New in Version 4.1.0
--------------------
This incremental release brings a series of new features and improvements,
and a host of bug fixes. Of particular note are:
Correlation Function Analysis (Corfunc)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
This performs a correlation function analysis of one-dimensional SAXS/SANS data,
or generates a model-independent volume fraction profile from the SANS from an
adsorbed polymer/surfactant layer.
A correlation function may be interpreted in terms of an imaginary rod moving
through the structure of the material. G1(R) is the probability that a rod of
length R moving through the material has equal electron/neutron scattering
length density at either end. Hence a frequently occurring spacing within a
structure manifests itself as a peak.
A volume fraction profile \Phi(z) describes how the density of polymer
segments/surfactant molecules varies with distance from an (assumed locally flat)
interface. *This is not yet implemented*.
Fitting of SESANS Data
^^^^^^^^^^^^^^^^^^^^^^
Data from Spin-Echo SANS measurements can now be loaded and fitted. The data will
be plotted against the correct axes and models will automatically perform a Hankel
transform in order to calculate SESANS from a SANS model.
Documentation
^^^^^^^^^^^^^
The documentation has undergone significant checking and updating.
Improvements
^^^^^^^^^^^^
* Correlation function (corfunc) analysis of 1D SAS data added from CCP13
* File converter tool for multi-file single column data sets
* SESANS data loading and direct fitting using the Hankel transformation
* Saving and loading of simultaneous and constrained fits now supported
* Save states from SasView v3.x.y now loaded using sasmodel model names
* Saving and loading of projects with 2D fits now supported
* Loading a project removes all existing data, fits, and plots
* Structure factor and form factor can be plotted independently
* OpenCL is disabled by default and can be enabled through a fit menu
* Data and theory fields are now independently expandable
Bug Fixes
^^^^^^^^^
* Fixes #667: Models computed multiple times on parameters changes
* Fixes #673: Custom models override built in models of same name
* Fixes #678: Hard crash when running complex models on GPU
* Fixes $774: Old style plugin models unloadable
* Fixes #789: stacked disk scale doesn't match cylinder model
* Fixes #792: core_shell_fractal uses wrong effective radius
* Fixes #800: Plot range reset on plot redraws
* Fixes #811 and #825: 2D smearing broken
* Fixes #815: Integer model parameter handling
* Fixes #824: Cannot apply sector averaging when no detector data present
* Fixes #830: Cansas HDF5 reader fully compliant with NXCanSAS v1.0 format
* Fixes #835: Fractal model breaks with negative Q values
* Fixes #843: Multilayer vesicle does not define effective radius
* Fixes #858: Hayter MSA S(Q) returns errors
* Numerous grammatical and contexual errors in documention
New in Version 4.0.1
--------------------
This release fixes the critical bug #750 in P(Q)xS(Q). Most damaging
it appears that the background term was being added to S(Q) prior to
multiplication by P(Q).
New in Version 4.0
------------------
This release fixes the various bugs found during the alpha and beta testing
Improvements
^^^^^^^^^^^^
* Support for reading data files from Anton Paar Saxess instruments
* Adds documentation on how to write custom models in the new framework
Bug Fixes
^^^^^^^^^
* Fixes #604: Pringle model questions
* Fixes #472: Reparameterize Teubner-Strey
* Fixes #530: Numerical instabilities in Teubner Strey model
* Fixes #658: ASCII reader very broken
New in Version 4.0 beta 1
-------------------------
This beta adds support for the magnetic and multilevel models of 3.1.2
and along with a host of bug fixes found in the alpha.
Model package changes and improvements
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
* All 3.1.2 models now available in new interface
* Old custom models should now still work
* Custom model editor now creates new style models
* Custom model editor supports better error checking
.. note:: Old custom models should be converted to the new model format
which is now the same as the built-in models and offers much
better support. The old custom model format will be deprecated
in a future version.
Documentation improvements
^^^^^^^^^^^^^^^^^^^^^^^^^^
* Continued general cleanup
Other improvements/additions
^^^^^^^^^^^^^^^^^^^^^^^^^^^^
* Support for new canSAS 2D data files added
* Plot axes range can now be set manually as well as by zooming
* Plot annotations can now be moved around after being placed on plot.
* The active optimizer is now listed on the top of the fit panel.
* Linear fits now update qmin and max when the x scale limits are
changed. Also the plot range no longer resets after a fit.
Bug fixes
^^^^^^^^^
* Fixes #511: Errors in linearized fits and clean up of interface
including Kratky representation
* Fixes #186: Data operation Tool now executes when something is
entered in the text box and does not wait for the user to hit enter
* Fixes #459: plot context menu bug
* Fixes #559: copy to clipboard in graph menu broken
* Fixes #466: cannot remove a linear fit from graph
* Numerous bugs introduced in the alpha
New in Version 4.0.0-alpha
--------------------------
This alpha release brings a major overhaul of the model system. The new model
package allows rapid integration of custom models and access to polydispersity
without requiring a compiler.
Model package changes and improvements
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
* Separation of GUI and calculations for future GUI enhancements
* Model interface moved to independent sasmodels package.
* Most models converted to new interface.
* Allows rapid integration of user-written models.
* OpenCL GPU utilization for faster fitting.
* Improved numerical integration of Bessel functions.
SESANS integration and implementation
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
* Scripting interface added for analysis of SESANS data.
* Hankel transformation now accepts finite acceptance angles.
* 2D cosine transformation added for TOF SESANS analysis.
Documentation improvements
^^^^^^^^^^^^^^^^^^^^^^^^^^
* The documentation tree was restructured for a better end user experience.
* The documentation for each model was revamped and verified by at least
two people following the conversion of the model.
* Theoretical 1D (and 2D if applicable) scattering curves are auto-generated
and added to the model documentation for each model.
Bug fixes
^^^^^^^^^
* Fixes #411: No stop button on simultaneous fit page
* Fixes #410: Error with raspberry model
* Fixes #364: Possible inconsistency in Poly_GausCoil model
* Fixes #439: Hayter Penfold MSA code needs checking
* Fixes #484: lammellerPC is precision limited
* Fixes #498: $HOME/.matplotlib conflicts
* Fixes #348: Control order in which fit parameters appear in the gui
* Fixes #456: Provide DREAM Results Panel with something to identify
data and age of results
* Fixes #556: Build script improvements for developers
New in Version 3.1.2
--------------------
This release is a major stability improvement, having fixed a serious bug
that came to light since release 3.1.1. All users should upgrade.
* Fixes #468: broken remove constraint buttons in
simultaneous/constrained fitting panel
* Fixes #474: resulting from changes in 3.1.1 that had
introduced an error in the high-Q of slit-smeared models.
* Fixes #478: which would cause wx to run out of IDs and result
in SasView crashing even if left alone.
* Fixes #479: missing help button on simultaneous/constrained fit page
* Fixes #480: GUI resizing issues on simultaneous fit page
* Fixes #486: broken Report Results
* Fixes #488: redraw issues in fit page
New in Version 3.1.1
--------------------
Fixes #457 that prevented SasView from starting if the user was not
connected to the internet, or was behind a proxy server.
New in Version 3.1.0
--------------------
The documentation/help has had a complete overhaul including:
* A completely new presentation interface (Sphinx).
* Proof reading!
* Updating for latest features.
* A Help (or sometimes ?) button has been added to every panel, and some
sub panels if appropriate, linking to the appropriate section in the
documentation.
* The model help has been split so that the Details button now brings up
a very short pop-up giving the equation being used while HELP goes to
the section in the full documentation describing the model.
* Extensive help has also been added for the new optimizer engine (see
below) including rules of thumb on how and when to choose a given
optimizer and what the parameters do.
The optimizer engine has been completely replaced. The new optimizer
still defaults to the standard Levenberg-Marquardt algorithm. However 4
other optimizers are now also available. Each starts with a set of default
parameters which can be tuned. The DREAM optimizer takes the longest but
is the most powerful and yields rich information including full parameter
correlation and uncertainty plots. A results panel has been added to
accommodate this. The five new optimizers are:
* A Levenberg-Marquardt optimizer
* A Quasi-Newton BFGS optimizer
* A Nelder-Mead Simplex optimizer
* A Differential Evolution optimizer
* A Monte Carlo optimizer (DREAM)
New models were added:
* MicelleSphCoreModel (currently residing in the Uncategorized category)
Existing models were updated:
* LamellarPS (bug in polydispersity integration fixed)
* RectangularPrismModel
* RectangularHollowPrismModel
* RectangularHollowPrismInfThinWallsModel
Other work:
* Infrastructure to allow SESANS data to be fit with models was added. This
will become available in a future release but can currently be used from
the command line with some caveats.
* A number of bugs were fixed including a thread crashing issue and an
incorrect slit smearing resolution calculation.
* Implemented much more robust error logging to enable much easier
debugging in general but particularly the debugging of issues reported by
SasView users.
* A number of infrastructure tasks under the hood to enhance maintainability
* Upgrade from Wx 2.8 to Wx 3.0.2 which allows several new features but
required significant additional rework as well.
* Fully implemented Sphinx to the build process to produce both better
user documentation and developer documentation.
* Restructuring of the code base to more unified nomenclature and structure
so that the source installation tree more closely matches the installer
version tree.
* Code cleanup (an ongoing task).
* Migration of the repository to github simplifying contributions from
non-project personnel through pull requests.
New in Version 3.0.0
--------------------
* The GUI look and feel has been refactored to be more familiar for
Windows users by using MDI frames. Graph windows are also now free-
floating.
* Five new models have been added: PringlesModel, CoreShellEllipsoidXTModel,
RectangularPrismModel, RectangularHollowPrismModel and
RectangularHollowPrismInfThinWallsModel.
* The data loader now supports ILL DAT data files and reads the full meta
information from canSAS file formats.
* Redefined convention for specifying angular parameters for anisotropic
models.
* A number of minor features have been added such as permitting a log
distribution of points when using a model to simulate data, and the
addition of a Kratky plot option to the linear plots.
* A number of bugs have also been fixed.
* Save Project and Save Analysis now work more reliably.
* BETA: Magnetic contrast supporting full polarization analysis has been
implemented for some spherical and cylindrical models.
* BETA: Two new tools have been added:
* A generic scattering calculator which takes an atomic, magnetic or
SLD distribution in space and generates the appropriate 2D
scattering pattern. In some cases the orientationally averaged
(powder) 1D scattering can also be computed. Supported formats
include: SLD or text, PDB, and OMF magnetic moment distribution
file.
* An image viewer/converter for data in image format; this reads in
an image file and will attempt to convert the image pixels to
data. Supported formats include: TIFF, TIF, PNG, BMP, JPG.
New in Version 2.2.1
--------------------
* Minor patch to support CanSAS XML v1.1 file format
* Added DataInfo for data in the DataExplorer and plots
* Added Maximize/Restore button in the title bar of the graphs
* Added a hide button in the toolbar of the graph panel
* The 'x' button now deletes a graph
* Edit SUM Model from the menubar can now generate and save more than one sum model
* Reports can now be saved in pdf format on WIN and MAC
* Made significant improvements to the batch/grid panel and fixed several bugs
* Fixed a number of other minor bugs
New in Version 2.2.0
--------------------
* Application name changed to SasView
* New fully customizable Category Manager added for better management of
increasing number of models
* Improved the Grid Window functionality in the batch fitting mode
* Added a simpler Graph/Plot modification interface
* Added a new 'Data Operation' tool for addition, subtraction, multiplication,
division, of two data sets.
* The 'Sum Model' editor was extended and renamed 'Summation and Multiplication'
editor
* Added more plot symbols options for 1d plots
* Added improved trapping of compiling errors to the 'New model editor'
* Added some intelligent outputs (e.g., Rg, background, or rod diameter
depending on the choice of axis scale of the plot) to the linear fits
* Added more models
Feature set from previous versions
-----------------------------------
Perspectives Available
^^^^^^^^^^^^^^^^^^^^^^
* Invariant calculator: Calculates the invariant, volume fraction, and
specific surface area.
* P(r) inversion calculator: Indirect Fourier transformation method.
* Fitting: the tool used for modeling and fitting 1D and 2D data to
analytical model functions
* Tools: provides a number of useful supplementary tools such as SLD
calculation
Fitting
^^^^^^^
* Includes a large number of model functions, both form factors and structure factors.
* Support P(Q)*S(Q) for form factors that flag they can be so multiplied.
* Supports Gaussian, lognormal, Shulz, rectangular and custom distribution
functions for models that need to include polydispersity or for orientational
distributions if appropriate.
* Anisotropic shapes and magnetic moment modeling in 2D allow for a non-uniform
distribution of orientations of a given axis leading to modeling and fitting
capabilities of non azimuthaly symmetric data.
* User can choose to weight fits or not. If using weights, the user can choose
the error bar on each point if provided in the file, the square root
of the intensity or the intensity itself.
* Instrumental resolution smearing of model or fits is provided with several
options: read the resolution/point fromt he file. Input a pinhole resolution
or a slit resolution.
* Users can define the Qrange (Qmin and Qmax) for both 1D and 2D data for
fitting and modeling, but not graphically. The range can be reset to the
defaults (limits of q in data set for a fit) with the reset button.
* A mask can be applied to 2D calculation and fitting.
* Normalized residual plots are provided with every fit.
* Model function help available through detail button or from the fitting panel.
* Simultaneous/(advanced)constrained fitting allows for fitting a single
data set or several different sets simultaneously with the application
of advanced constraints relating fit parameters to functions of other
parameters (including from a different set). For example thickness of
shell = sin(30) times the length.
* Models that are the sum of two other models can be easily generated through the
SUM Model menubar item.
* New Python models can be added on the fly by creating an appropriate Python
file in the model plugin directory. Two tools are provided to help:
An easy to use custom model editor allows the quick generation of new Python
models by supplying only the parameters and their default value (box 1)
and the mathematical function of the model (box 2) and generating the
necessary .py file. A separate advanced model editor provides a full Python
file editor. Either way once saved the model becomes immediately available
to the application.
* A batch fitting capability allows for the analysis of a series of data sets to
a single model and provides the results in a tabular form suitable for saving
or plotting the evolution of the fit parameters with error bars (from within
the application).
Tools
^^^^^
* A scattering length density calculator,including some X-ray information
is provided.
* A density to vol. fraction converter is provided
* In application access to a Python shell/editor (PyCrust) is provided
* An instrument resolution calculator, including possible gravitational and
TOF effects is provided
* A slit size calculator optimized for Anton Paar Saxess is provided.
* A kiessig fringe thickness calculator is provided
Plots and plot management
^^^^^^^^^^^^^^^^^^^^^^^^^
* A 3D graphing option (for 2d data/results) is provided with the view
controlled by the mouse
* 2D plots are shown with an intensity color bar. 2D Color map can be user
adjusted.
* Supports output of plot to a variety of graphic formats. Supported formats
include: png, eps, emf, jpg/jpeg, pdf, ps, tif/tiff, rawRGBbitmap(raw, rgba),
and scalable vector graphic (svg/svgz)
* Supports ouput of data in plot (1 or 2D) to limited data formats
* Multiple data sets can be loaded into a single graph for viewing (but a fit
plot can currently only have a single plot).
* Extensive context sensitive plot/fitting/manipulation options are available
through a right mouse click pop-up menu on plots.
Data management
^^^^^^^^^^^^^^^
* Supports 2 + column 1D ASCII data, NIST 1D and 2D data, and canSAS data
via plug-in mechanism which can easily allow other readers as appropriate.
* 2D data is expected in Q space but for historical reasons accepts the
NIST 2D raw pixel format and will do conversion internally.
* The full data and metadata available to SasView is viewable in ASCII via
right clicking on a data set and choosing Data Info in the DataExplorer
or on the plots
* Supports loading a single file, multiple files, or a whole folder
* An optional Data Explorer is provided (default) which simplifies managing,
plotting, deleting, or setup for computation. Most functions however do
not require access to the explorer/manager and can be accessed through
right click menus and the toolbar. The data explorer can be re-started
from the menu bar.
Data manipulation
^^^^^^^^^^^^^^^^^
* Support various 2D averaging methods : Circular, sectors, annular,
boxsum, boxQx and boxQy.
* A 2D data maks editor is provided
* 2D mask can be applied to the circular averaging.
Miscellaneous features
^^^^^^^^^^^^^^^^^^^^^^
* Limited reports can be generated in pdf format
* Provides multiprocessor support(Windows only)
* Limited startup customization currently includes default startup
data folder and choice of default starting with data manager
* Limited support for saving(opening) a SasView project or a SasView analysis
(subproject) is provided.
* SasView can be launched and loaded with a file of interesty by double-clicking
on that file (recognized extension)
* A data file or data folder can be passed to SasView when launched from
the command line.
* Limited bookmarking capability to later recall the results of a fit calculation
is provided.
* Extensive help is provided through context sensitive mouse roll-over,
information bar (at the bottom of the panel), the console menu, and
access to the help files in several different ways.
Downloading and Installing
==========================
.. note:: If you have a SasView installer (.EXE or .MSI), you do not need to
worry about any of the following. However, it is highly recommended
that any previous versions of SasView are uninstalled prior to
installing the new version UNLESS you are installing SasView to
versioned folders.
The easiest approach to setting up the proper environment to build from source
is to use Conda. Instructions for setting up and using Conda can be found at
https://github.com/SasView/sasview/wiki/DevNotes_DevEnviroment
Additional information is available at http://www.sasview.org/download/ under
the 'For Developers' section, and on our Trac site at https://github.com/SasView/sasview/wiki/
System Requirements
-------------------
* For SasView 4.x and earlier: A Python version >= 2.5 and < 3.0 should be running
on the system. We currently use Python 2.7
* For SasView 5.x: A Python version > 3.0 should be running on the system. We
currently use Python 3.6
Package Dependencies
--------------------
* Ensure the required dependencies are installed
* For the latest list of dependencies see the appropriate yml file in
the SasView repo at sasview/build_tools/conda/ymls
Installing from Source
----------------------
* Get the source code
* Create a folder to contain the source code; if working with
multiple versions you might want to use versioned folder names
like 'sasview-x.x.x'
* Open a command line window in the source code folder
* To get the CURRENT DEVELOPMENT VERSION from source control use
git clone https://github.com/SasView/sasview.git sasview
git clone https://github.com/Sasview/sasmodels.git sasmodels
git clone https://github.com/bumps/bumps.git bumps
* To get a SPECIFIC RELEASE VERSION from source control go to
https://github.com/SasView/sasview/releases
and download the required zip or tar.gz file. Unzip/untar it
to the source code folder.
Building and Installing
-----------------------
* To build the code
use 'python setup.py build'
* To build the documentation
use'python setup.py docs'
Running SasView
---------------
* use 'python run.py'; this runs from the source directories, so you
don't have to rebuild every time you make a change, unless you are
changing the C model files.
* if using Conda the above command will also build SasView, but you
must issue 'activate sasview' first.
Known Issues
============
A full list of known bugs and feature requests by release version that
users may wish to be aware of can be viewed at the following links:
`[sasview] <https://github.com/SasView/sasview/milestones>`_
`[sasmodels] <https://github.com/SasView/sasmodels/milestones>`_
All 5.0.x versions / 4.2.2 - All systems
----------------------------------------
A problem has been identified in Version 4.2.2 which also affects all 5.0.x
versions. The Easy Add/Multiply Editor dialog should not be used to combine
a plugin model with a built-in model, or to combine two plugin models. In
5.0.x the operation will fail, generating an error message in the Log Explorer
similar to
ModuleNotFoundError: No module named 'plugin_module_name'
If it is necessary to generate a plugin model from more than two built-in models,
please edit the plugin model .py file directly and specify the combination of
built-in models directly. For example::
from sasmodels.core import load_model_info
from sasmodels.sasview_model import make_model_from_info
model_info = load_model_info('power_law + fractal + gaussian_peak + gaussian_peak')
model_info.name = 'MyBigPluginModel'
model_info.description = 'For fitting pores in crystalline framework'
Model = make_model_from_info(model_info)
5.0.0 / 5.0.1 / 5.0.2 / 5.0.3 - All systems
-------------------------------------------
There is a bug which is stopping Batch Fitting from using the intensity
uncertainty (dI) data if this is present in the files being processed.
As the default behaviour of normal Single Fitting is to automatically
use the dI data in the file if it is present, this means that the results
of Single Fitting and Batch Fitting the same data will differ.
All versions upto and including 5.0.2 - All systems
---------------------------------------------------
A very long-standing error has been identified in the Invariant Analysis
perspective. The value of the specific surface $Sv$ that is being returned
is in fact *twice* the value that it should be.
5.0.0 / 5.0.1 / 5.0.2 - All systems
-----------------------------------
In these versions, and unlike version 4.x, only fitting sessions can be saved as project files.
4.2.0 - All systems
-------------------
The refactoring of the plugin model architecture means that some issues
may be encountered if Save Project/Analysis files using plugin models
created in earlier versions of SasView are loaded in version 4.2.0.
For example:
* on loading an old project file an error window appears with the error
*This model state has missing or outdated information* or *dictionary changed size during iteration*.
* if this occurs, try restarting SasView and reloading the project.
* on loading an old project file all the FitPages and Graphs appear, but
only the SasView default model parameters appear in the FitPages.
* this has happened because plugin model parameter names have changed.
There are two possible workarounds:
* Install the version of SasView that the project was created in,
recreate the plugin in that version, then run 4.2.0 and re-load
the project. All being well, 4.2.0 will still compile the old
plugin.
* If 4.2.0 cannot compile the old plugin, the more tedious solution
is to use a text editor to do global search & replace operations
to change all the parameter names in the project file by hand. The
quickest way to see the *existing* parameter names is simply to
scroll to the bottom of the project file. To see what the *new*
parameter names should be, simply create the equivalent plugin in
SasView 4.2.0. In most instances, what was *p1_parameter* will
become *A_parameter*, *p2_parameter* will become *B_parameter*,
and so on.
4.1.x- All systems
------------------
The conversion to sasmodels infrastructure is ongoing and should be
completed in the next release. In the meantime this leads to a few known
issues:
* The way that orientation is defined is being refactored to address
long standing issues and comments. In release 4.1 however only models
with symmetry (e.g. a=b) have been converted to the new definitions.
The rest (a <> b <> c - e.g. parellelepiped) maintain the same
definition as before and will be converted in 4.2. Note that
orientational distribution also makes much more sense in the new
framework. The documentation should indicate which definition is being
used for a given model.
* The infrastructure currently handles internal conversion of old style
models so that user created models in previous versions should continue
to work for now. At some point in the future such support will go away.
Everyone is encouraged to convert to the new structure which should be
relatively straight forward and provides a number of benefits.
* In that vein, the distributed models and those generated by the new
plugin model editor are in the new format, however those generated by
sum|multiply models are the old style sum|multiply models. This should
also disappear in the near future
* The on the fly discovery of plugin models and changes thereto behave
inconsistently. If a change to a plugin model does not seem to
register, the Load Plugin Models (under fitting -> Plugin Model
Operations) can be used. However, after calling Load Plugin Models, the
active plugin will no longer be loaded (even though the GUI looks like
it is) unless it is a sum|multiply model which works properly. All
others will need to be recalled from the model dropdown menu to reload
the model into the calculation engine. While it might be annoying it
does not appear to prevent SasView from working..
* The model code and documentation review is ongoing. At this time the
core shell parellelepiped is known to have the C shell effectively fixed
at 0 (noted in documentation) while the triaxial ellipsoid does not seem
to reproduce the limit of the oblate or prolate ellipsoid. If errors are
found and corrected, corrected versions will be uploaded to the
marketplace.
* (Added after Release 4.2.0) The scale parameter reported from the spinodal
model is the square root of the true value.
3.1- All systems
----------------
* The documentation window may take a few seconds to load the first time
it is called. Also, an internet connection is required before
equations will render properly. Until then they will show in their
original TeX format.
* If the documentation window remains stubbornly blank, try installing a
different browser and set that as your default browser. Issues have
been noted with Internet Explorer 11.
* Check for Updates may fail (with the status bar message ' Cannot
connect to the application server') if your internet connection uses
a proxy server. Tested resolutions for this are described on the
website FAQ.
* The copy and paste functions (^C, ^V) in the batch mode results grid
require two clicks: one to select the cell and a second to select the
contents of the cell.
* The tutorial has not yet been updated and is somewhat out of date
* Very old computers may struggle to run the 3.x and later releases
* Polydispersity on multiple parameters included in a simultaneous/
constrained fit will likely not be correct
* Constrained/simultaneous fit page does not have a stop button
* Constrained/simultaneous fit do not accept min/max limits
* Save project does not store the state of all the windows
* Loading projects can be very slow
* Save Project only works once a data set has been associated with
a model. Error is reported on status bar.
* There is a numerical precision problem with the multishell model when
the inner radius gets large enough (ticket #288)
* The angular distribution angles are not clearly defined and may in
some cases lead to incorrect calculations(ticket #332)
3.1 - Windows
-------------
* If installed to same directory as old version without first removing
the old version, the old desktop icon will remain but point to the
new exe version. Likewise all the start menu folders and items will
have the old name even though pointing to the new version. Usually
safest to uninstall old version prior to installing new version anyway.
3.1 - MAC
---------
* Application normally starts up hidden. Click icon in Dock to view/use
application.
* Multiprocessing does not currently work on MAC OS
3.1 - Linux
-----------
* Not well tested
SasView Website
===============
http://www.sasview.org
This main project site is the gateway to all information about the sasview
project. It includes information about the project, a FAQ page and links
to all developer and user information, tools and resources.
Frequently Asked Questions
==========================
http://www.sasview.org/faq/